«Если рабочий хочет хорошо выполнять свою работу, он должен сначала заточить свои инструменты» — Конфуций, «Аналитики Конфуция. Лу Лингун»
титульная страница > программирование > Автоматические выключатели в Go: предотвратите каскадные сбои

Автоматические выключатели в Go: предотвратите каскадные сбои

Опубликовано 6 августа 2024 г.
Просматривать:674

Circuit Breakers in Go: Stop Cascading Failures

Circuit Breakers

A circuit breaker detects failures and encapsulate the logic of handling those failures in a way that prevents the failure from constantly recurring. For example, they’re useful when dealing with network calls to external services, databases, or really, any part of your system that might fail temporarily. By using a circuit breaker, you can prevent cascading failures, manage temporary errors, and maintain a stable and responsive system amidst a system breakdown.

Cascading Failures

Cascading failures occur when a failure in one part of the system triggers failures in other parts, leading to widespread disruption. An example is when a microservice in a distributed system becomes unresponsive, causing dependent services to timeout and eventually fail. Depending on the scale of the application, the impact of these failures can be catastrophic which is going to degrade performance and probably even impact user experience.

Circuit Breaker Patterns

A circuit breaker itself is a technique/pattern and there are three different states it operates which we will talk about:

  1. Closed State: In a closed state, the circuit breaker allows all requests to pass through to the target service normally as they would. If the requests are successful, the circuit remains closed. However, if a certain threshold of failures is reached, the circuit transitions to the open state. Think of it like a fully operational service where users can log in and access data without issues. Everything is running smoothly.

Circuit Breakers in Go: Stop Cascading Failures

2. Open State : In an open state, the circuit breaker immediately fails all incoming requests without attempting to contact the target service. The state is entered to prevent further overload of the failing service and give it time to recover. After a predefined timeout, the circuit breaker moves to the half-open state. A relatable example is this; Imagine an online store experiences a sudden issue where every purchase attempt fails. To avoid overwhelming the system, the store temporarily stops accepting any new purchase requests.

Circuit Breakers in Go: Stop Cascading Failures

3. Half-Open State : In the half-open state, the circuit breaker allows a (configurable) limited number of test requests to pass through to the target service. And if these requests are successful, the circuit transitions back to the closed state. If they fail, the circuit returns to the open state. In the example of the online store i gave in the open state above, this is where the online store starts to allow a few purchase attempts to see if the issue has been fixed. If these few attempts succeed, the store will fully reopen its service to accept new purchase requests.

This diagram shows when the circuit breaker tries to see if requests to Service B are successful and then it fails/breaks:

Circuit Breakers in Go: Stop Cascading Failures

The follow up diagram then shows when the test requests to Service B succeeds, the circuit is closed, and all further calls are routed to Service B again:

Circuit Breakers in Go: Stop Cascading Failures

Note : Key configurations for a circuit breaker include the failure threshold (number of failures needed to open the circuit), the timeout for the open state, and the number of test requests in the half-open state.

Implementing Circuit Breakers in Go

It’s important to mention that prior knowledge of Go is required to follow along in this article.

As with any software engineering pattern, circuit breakers can be implemented in various languages. However, this article will focus on implementation in Golang. While there are several libraries available for this purpose, such as goresilience, go-resiliency, and gobreaker, we will specifically concentrate on using the gobreaker library.

Pro Tip : You can see the internal implementation of the gobreaker package, check here.

Let’s consider a simple Golang application where a circuit breaker is implemented to handle calls to an external API. This basic example demonstrates how to wrap an external API call with the circuit breaker technique:

Let’s touch on a few important things:

  1. gobreaker.NewCircuitBreaker function initializes the circuit breaker with our custom settings
  2. cb.Execute method wraps the HTTP request, automatically managing the circuit state.
  3. MaximumRequests is the maximum number of requests allowed to pass through when the state is half-open
  4. Interval is the cyclic period of the closed state for the circuit breaker to clear the internal counts
  5. Timeout is the duration before transitioning from open to half-open state.
  6. ReadyToTrip is called with a copy of counts whenever a request fails in the closed state. If ReadyToTrip returns true, the circuit breaker will be placed into the open state. In our case here, it returns true if requests have failed more then three consecutive times.
  7. OnStateChange is called whenever the state of the circuit breaker changes. You would usually want to collect the metrics of the state change here and report to any metrics collector of your choice.

Let’s write some unit tests to verify our circuit breaker implementation. I will only be explaining the most critical unit tests to understand. You can check here for the full code.

  1. We will write a test that simulates consecutive failed requests and checks if the circuit breaker trips to the open state. Essentially, after 3 failures, when the forth failure occurs, we expect the circuit breaker to trip (open) since our condition says counts.ConsecutiveFailures > 3 . Here's what the test looks like:
 t.Run("FailedRequests", func(t *testing.T) {
         // Override callExternalAPI to simulate failure
         callExternalAPI = func() (int, error) {
             return 0, errors.New("simulated failure")
         }

         for i := 0; i 



  1. We will test the open > half - open > closed states. But we will first simulate an open circuit and call a timeout. After a timeout, we need to make at least one success request for the circuit to transition to half-open. After the half-open state, we need to make another success request for the circuit to be fully closed again. If for any reason, there’s no record of a success request in the case, it will go back to being open. Here’s how the test looks like:
 //Simulates the circuit breaker being open, 
 //wait for the defined timeout, 
 //then check if it closes again after a successful request.
     t.Run("RetryAfterTimeout", func(t *testing.T) {
         // Simulate circuit breaker opening
         callExternalAPI = func() (int, error) {
             return 0, errors.New("simulated failure")
         }

         for i := 0; i 



  1. Let’s test the ReadyToTrip condition which triggers after 2 consecutive failure requests. We'll have a variable that tracks for consecutive failures. The ReadyToTrip callback is updated to check if the circuit breaker trips after 2 failures ( counts.ConsecutiveFailures > 2). We will write a test that simulates failures and verifies the count and that the circuit breaker transitions to the open state after the specified number of failures.
 t.Run("ReadyToTrip", func(t *testing.T) {
         failures := 0
         settings.ReadyToTrip = func(counts gobreaker.Counts) bool {
             failures = int(counts.ConsecutiveFailures)
             return counts.ConsecutiveFailures > 2 // Trip after 2 failures
         }

         cb = gobreaker.NewCircuitBreaker(settings)

         // Simulate failures
         callExternalAPI = func() (int, error) {
             return 0, errors.New("simulated failure")
         }
         for i := 0; i 



Advanced Strategies

We can take it a step further by adding an exponential backoff strategy to our circuit breaker implementation. We will this article keep it simple and concise by demonstrating an example of the exponential backoff strategy. However, there are other advanced strategies for circuit breakers worth mentioning, such as load shedding, bulkheading, fallback mechanisms, context and cancellation. These strategies basically enhance the robustness and functionality of circuit breakers. Here’s an example of using the exponential backoff strategy:

Exponential Backoff

Circuit breaker with exponential backoff

Let’s make a couple of things clear:

Custom Backoff Function: The exponentialBackoff function implements an exponential backoff strategy with a jitter. It basically calculates the backoff time based on the number of attempts, ensuring that the delay increases exponentially with each retry attempt.

Handling Retries: As you can see in the /api handler, the logic now includes a loop that attempts to call the external API up to a specified number of attempts ( attempts := 5). After each failed attempt, we wait for a duration determined by the exponentialBackoff function before retrying.

Circuit Breaker Execution: The circuit breaker is used within the loop. If the external API call succeeds ( err == nil), the loop breaks, and the successful result is returned. If all attempts fail, an HTTP 503 (Service Unavailable) error is returned.

Integrating custom backoff strategy in a circuit breaker implementation indeed aims to handle transient errors more gracefully. The increasing delays between retries help reduce the load on failing services, allowing them time to recover. As evident in our code above, our exponentialBackoff function was introduced to add delays between retries when calling an external API.

Additionally, we can integrate metrics and logging to monitor circuit breaker state changes using tools like Prometheus for real-time monitoring and alerting. Here’s a simple example:

Implementing a circuit breaker pattern with advanced strategies in go

As you’ll see, we have now done the following:

  1. In L16–21, we define a prometheus counter vector to keep track of the number of requests and their state (success, failure, circuit breaker state changes).
  2. In L25–26, the metrics defined are registered with Prometheus in the init function.

Pro Tip : The init function in Go is used to initialize the state of a package before the main function or any other code in the package is executed. In this case, the init function registers the requestCount metric with Prometheus. And this essentially ensures that Prometheus is aware of this metric and can start collect data as soon as the application starts running.

  1. We create the circuit breaker with custom settings, including the ReadyToTrip function that increases the failure counter and determines when to trip the circuit.

  2. OnStateChange to log state changes and increment the corresponding prometheus metric

  3. We expose the Prometheus metrics at /metrics endpoint

Wrapping Up

To wrap up this article, i hope you saw how circuit breakers play a huge role in building resilient and reliable systems. By proactively preventing cascading failures, they fortify the reliability of microservices and distributed systems, ensuring a seamless user experience even in the face of adversity.

Keep in mind, any system designed for scalability must incorporate strategies to gracefully handle failures and swiftly recover —  Oluwafemi , 2024

Originally published at https://oluwafemiakinde.dev on June 7, 2024.

Заявление о выпуске Эта статья воспроизведена по адресу: https://dev.to/oluwafemiakind1/circuit-breakers-in-go-stop-cascading-failures-3p1l?1. Если есть какие-либо нарушения, свяжитесь с [email protected], чтобы удалить ее.
Последний учебник Более>

Изучайте китайский

Отказ от ответственности: Все предоставленные ресурсы частично взяты из Интернета. В случае нарушения ваших авторских прав или других прав и интересов, пожалуйста, объясните подробные причины и предоставьте доказательства авторских прав или прав и интересов, а затем отправьте их по электронной почте: [email protected]. Мы сделаем это за вас как можно скорее.

Copyright© 2022 湘ICP备2022001581号-3