Try Basic Fixes

• Rule out any compatibility issues: Only computers with USB-C ports that support DisplayPort alternate modes can transmit video and audio signals. Refer to your PC and monitor’s user manual or visit the manufacturer’s website to ensure both devices are capable of video output over a USB-C cable.
• Use the correct USB cable: You need to ensure that your USB-C cable is certified for DisplayPort or Thunderbolt 3, as these support video output and are suitable for connecting your laptop to various monitors.
• Use the correct USB port: If you connect a display to a port that doesn’t support power delivery, you may not be able to charge your laptop or transfer data from a single connection, causing Windows to display this error. Try switching to a different port, if available, to see if that resolves the issue.
• Install Windows updates: Windows updates often bring bug fixes and improvements to your PC, so it’s best to install them. Open the Settings app, navigate to the Windows Update tab, and click the Check for updates button to download and install pending updates.

Fix 1: Run the Hardware and Devices Troubleshooter

The Hardware and Devices troubleshooter on Windows can scan your devices for any irregularities and attempt to fix them automatically. You can try running this tool to see if it fixes the “Display connection might be limited” error on your Windows 10 or 11 PC.

Step 1: Press the Windows R keyboard shortcut to open the Run dialog box. Type the following command in the Open field and press Enter.

msdt.exe -id DeviceDiagnostic

Step 2: Click Advanced.

Step 3: Tick the Apply repairs automatically checkbox and click Next.

Wait for the troubleshooter to do its job, then check if the error reappears.

Fix 2: Update USB Drivers

Outdated or incompatible USB drivers on your PC may be the cause of your USB-C port problems. In that case, updating the drivers on your PC should resolve the issue. Here’s how to do that.

Step 1: Right-click on the Start icon and select Device Manager from the list.

Step 2: Double-click on Universal Serial Bus controllers to expand it. Right-click on the first entry and select Update driver. Then, follow the on-screen prompts to finish the updates.

Step 2: Click the Restart now button next to Advanced startup.

Step 3: Select Restart now to confirm.

Step 4: Wait for your PC to reboot and then go to Troubleshoot > Advanced options > UEFI Firmware Settings.

Step 5: Click the Restart button to boot into the BIOS.

Step 6: Once you’re in BIOS, press F9 to access the Setup Defaults option. Then, select Yes.

Step 7: Press F10 to save changes and exit BIOS.

Once you complete the above steps, restart your PC and the error should not appear afterward.